Get the chair that’s designed for your body — and built for your workspace. Select the options that fit your specifications on the left, and then get a quote for the BioFit seating that’s right for you!
Image not available https://d3w4sw4zvj0cmw.cloudfront.net/chairComponents/E-T-XA-E-PAN-BLACKVINYL-000.png & https://d3w4sw4zvj0cmw.cloudfront.net/chairComponents/S-RC-XF-L-C-000.png
EES-L-RC-T-XF-XA-ISO4>P28540
https://mychair.biofit.com/build/EES-L-RC-T-XF-XA-ISO4%3EP28540
Component Descriptions

Market
Clean Room
Precision designed and tested models featuring special components, materials, finishes and construction techniques to meet ISO classes 3 through 8.
Seat
E - Ergo
Ergonomic upholstered seat with four-way contouring and internal seat board bumperguard; measures 18.5" wide x 17" deep x 3" thick.
Performance Package
ISO Class 4
Also known as "C10". Appropriate metal parts are chrome-plated. All chair parts are selected to assure ISO class 4 clean room compatibility.
Backrest
E - Ergo
Upholstered backrest with lumbar support and plastic protective panel; measures 15.5" wide x 14.5" high.
Base
S / TUL - Steel Tubular
Small, five-legged tubular base with caster-to-caster diameter of 23.0" and maximum width of 22.8".
Welded 1" x 14-gauge steel tubular legs ensure uncompromised strength, withstanding test loads of 2x BIFMA
strength requirements. Features standard 50mm, steel-reinforced, tapered hub (1° 26' 16" (Morse) taper) with
gauge line elevation of 203mm from the caster insert plane. Steel tubular ring (tube: 1" by 18-gauge, ring: 21"
dia.) welded to top of legs. A reinforced nylon insert at the end of each leg adapts the 1" x 14-gauge leg to
accept a caster or glide stem. The welds at the hub are concealed by a two-piece, polypropylene cover.
Seat Height
L - Low
For low working heights such as desks or benches 34" or shorter. Provides a range of 18" - 22".
Casters / Glides
RC - Resistance Caster
Two inches in height, with dual soft-wheels. Casters resist movement when the seat is unoccupied.
Plastic collar around caster stem to match base. Standard casters have grey tread.
Controls
T / E1 - Task
Control allows function of the seat height activation and backrest adjustments by means of easily
engaged levers which can be activated from the seated position. Seat tilt is fixed at 3-1/2° rearward while the
backrest adjusts 8° forward and 13° rearward.
Footring
Affixed Footring
21” diameter non-adjustable 1” x 18-gauge tubular steel ring welded to top of legs, 8” above floor surface.
Under Seat Upholstery
No Under Seat Upholstery
Memory Foam
No Memory Foam
Base & Backbar
Black / Chrome
Black or chrome depending on performance package.
Quality Backed by a 13-Year Warranty
Nearly all BioFit furniture products are warrantied against mechanical or structural failure due to defective material or workmanship for 13 years of normal, multishift use. Pneumatic cylinders are covered for the functional lifetime of the chair or stool. Intensive Plus chairs are warrantied for 5 years. BioFit reserves the right to recondition or replace any units covered by this warranty. Freight and any other consequential damages are not covered. All return shipments require written authorization and must be freight prepaid unless otherwise approved in writing. COM (Customer’s Own Material) upholstery materials are not covered. BioFit takes its warranty, repair and maintenance responsibilities very seriously. Efforts by unqualified personnel to perform repairs on BioFit products can result in dangerous conditions which can lead to serious bodily injury. Any attempt to modify, alter or make unauthorized repairs to BioFit products may not only seriously jeopardize the safety of the user, but will void this warranty in every respect. Disclaimer: 13-year warranty does not apply to Intensive Plus™ seating, which carries a 5-year warranty.
